Sika Tile

SikaTile®-Ultima Grout is a professional-grade, ready-to-use grout designed for commercial and residential installations with porcelain, ceramic and natural-stone tiles, glass tile, Gauged Porcelain Tile Panels and Slabs (GPT), luxury vinyl tile (LVT), luxury vinyl plank (LVP). SikaTile®-Ultima Grout can be used to grout interior and exterior applications, as well as intermittent wet conditions such as bathtub, surrounds, shower walls, and shower floors. It is formulated using colored quartz technology, which ensures color consistency, excellent stain resistance, ease of cleanability and improved workability. In addition, this grout will not effloresce and does not require sealing. Used for grout joints from 1/16" to 1/2" (1.5 to 13 mm).

• Superior performing ready to use grout
• No mixing, easy to spread and clean
• Color consistent with no efflorescence

SikaTile®-200 Fracture Guard Rapid is a single component, fast-drying thin, liquid applied crack isolation membrane for installation under ceramic tile or stone in residential, commercial, and industrial environments. With excellent elongation, adhesion, and high strength properties, SikaTile®-200 Fracture Guard Rapid provides a thin, continuous barrier providing up to 1/8” (3 mm) of in-plane crack isolation. SikaTile®-200 Fracture Guard Rapid dries in 1 to 2 hours depending on ambient conditions and is then ready to receive any Sika polymer or epoxy mortar.

• For use on all sound common surfaces
• Crack isolation up to 1/8”
• Excellent elongation will inhibit the transfer of cracks

SikaTile®-400 LHT Pro Set is a professional grade, single-component, non-shrinking, polymer-modified mortar for interior and exterior setting of large and heavy tile and natural stone. It may be applied from at 3/32" to 3/4" (2.4 mm to 19 mm) thickness to provide better support under large and heavy tiles and stone and can be used for both interior and exterior installations of tile in most residential and commercial floor and wall applications. SikaTile®-400 LHT Pro Set, features innovative Dustless Technology producing approximately 80% less dust than ordinary thin sets and is designed to promote cleaner working conditions and reduce mess. It uses less water and is creamier and easy to spread.

• For use with large and heavy tile and natural stone
• Non-slumping/Non-shrinking formula eliminates tile lippage
• May be applied up to 3/4" (19 mm) thick on horizontal applications

SikaTile®-475 LHT Premium Set is a premium-grade, single-component large and heavy tile mortar that is ideal for installation of gauged (formerly “thin”) porcelain tile as well as large and heavy ceramic and porcelain tile and natural stone. This high-performance, flexible, polymer-modified mortar is formulated for ease of application and features up to 50% more coverage, extended open time and superior transfer properties to enhance back-buttering.

• For use with large ceramic, porcelain, gauged porcelain, marble, granite, and natural stone
• Flexible adhesive, suitable for high traffic area
• Superior transfer promotes full coverage for gauged porcelain tile panels

Sika® Level-225 is a one-component, durable and versatile cementitious underlayment for interior concrete and cementitious substrates. It can be applied manually or by pump to produce a self-smoothing, rapid-setting, flat and economical substrate prior to the application of a final floor finish. Typical application thickness is 1/16”–1-1/4” (1.5–31 mm).

• Highly fluid self-leveling
• Levels new and renovates old floors
• Interior only

SikaTile^®-815 Secure Grout is a premium, high-performance, fine aggregate, rapid-setting, polymer-modified, color consistent, and efflorescence-free grout. Specially formulated for grouting all types of ceramic and dimensional stone tiles on walls and floors, SikaTile®-815 Secure Grout is water-cleanable and easy to apply and used for joints from 1/16” (1.5 mm) to 1/2" (13 mm) in width, eliminating the need for different grout products. Itfeatures innovative Dustless Technology producing less dust than ordinary cement grouts and is designed to promote cleaner working conditions and reduce mess.

• Polymer modified for hard, durable, high performing results
• Stain-resistant, color consistent, and efflorescence free
• For 1/16" (1.5 mm) to 1/2" (13 mm) grout joints

Sika® Level-01 Primer Plus is a one-part, water-dispersed and solvent-free, acrylic-based solution used to prime and seal floor surfaces prior to the application of Sika^® Level products.

• Water-based and solvent-free
• Penetrates substrate to reduce outgassing and formation of bubbles in the underlayment
• Prevents water loss from the underlayment into the substrate

SikaTile®-100 Moisture Guard is a single component, fast-drying, thin mil, load-bearing waterproofing, and crack isolation membrane for installation under ceramic tile or stone in residential, commercial, and industrial environments. With excellent elongation, adhesion, and high strength properties, SikaTile®-100 Moisture Guard provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common change of plane areas such as coves, corners, cracks, and drains, it can be combined with optional Reinforcing Fabric to provide additional protection. SikaTile®-100 Moisture Guard dries in 2 to 4 hours depending on ambient conditions and is then ready to receive any Sika polymer or epoxy mortar. SikaTile®-100 Moisture Guard is IAPMO-listed for use as a shower-pan liner, can be flood-tested after 4 to 6 hours of drying time, and exceeds ANSI A118.10 and ANSI A118.12 standards.

• For use in areas that require positive waterproofing
• Crack Isolation up to 1/8”
• Fast drying, foot traffic in 2 – 4 hours
•  

Sikasil^®-N Plus US is a general purpose, one-component, non-sag, elastomeric, 100% RTV neutral cure silicone sealant. Meets the requirements of ASTM C-920, Type S, Grade NS, Class 25, Use NT, T, M, G, A, O; TT-S-00230C, Type II, Class A; TT-S-001543A, Class A; CAN/CGSB-19.13-M87, AAMA 802.3 Type II, AAMA 803.3, AAMA 805.2, AAMA 808.3 and California Air Resources Board 2003 requirements for Volatile Organic Compound content.

• Extremely long service life
• Excellent flexibility for dynamic joint movement
• Bonds to most substrates without priming